A small gallery commissions a folded leaflet for an exhibition. The designer lays out three equal columns, puts an introduction on the left and sends a flat PDF for approval. On screen, everything lines up. When the first printed copy is folded, the panel meant to tuck inside catches against the crease, and the opening reveals the wrong part of the story. The problem was already in the artwork. The screen preview simply did not ask the same questions as a pair of hands.
A folded leaflet is a reading sequence built into a sheet of paper. If you commission print for a show, a workshop or a small business, check where the folds land and what the reader sees at each stage. A flat PDF can look polished before either check has been done.
Choose the fold by how the leaflet should open
A roll fold, also known as a letter fold or C-fold, wraps one panel inside another. A Z-fold opens with alternating folds. Both can give you three panels per side, but the way they reveal those panels differs. Solopress’s guide to folded leaflets illustrates the distinction. It also explains why an inner roll-fold panel is made a little narrower: it needs room to tuck in.
Choose the format by following the reader. For the hypothetical gallery, someone picks up the leaflet to decide whether to enter the exhibition. The cover might show the exhibition name and dates. Opening it once might reveal the short introduction. The fully opened sheet might carry an illustrated route through the rooms. A visitor keeping the leaflet as a reference might want opening hours or an address on the back, where they can find them again without opening the whole thing.
That sequence gives the designer a better brief than ‘put the information into six panels’. A café that wants a menu to open out all at once may make different choices from a gallery that wants a cover and a gradual reveal. Sketch what should happen with the leaflet closed, opened once and opened flat before deciding which image or block of copy belongs where.
Use the template for the exact job
Do not use three equal columns as a substitute for a supplier’s roll-fold template. fPrint’s folded leaflet templates, for example, specify two 100 mm panels and a 97 mm tuck-in panel for one A4 roll-fold product. Its comparable A4 Z-fold example has three 99 mm panels. Those figures describe that supplier’s templates. Ask your chosen printer for the correct template for your size, fold and stock.
Check the inside and outside separately. The narrow panel may look as though it has changed sides when you view the reverse, because you are now looking at the other face of the same physical panel. Rely on the template’s panel labels and fold marks rather than guessing from the direction of the artwork. A common handover mistake is to copy the outside guides to the inside and forget that the two sides need to correspond when the sheet is turned over.
Pay particular attention to small type, icons and narrow borders near a fold. Use the supplier’s recommended clearance. A photograph can deliberately run across a crease, but a room number or phone number should not be difficult to read because it sits on one. If a design needs exact alignment across two panels, ask whether the chosen finish and fold can hold the alignment you expect. You may prefer to give the artwork more room to move.
Make a paper proof that you can handle
Print a proof at actual size, where your printer and paper allow it. If you cannot print the full sheet at that size, make a plain paper mock-up using the template dimensions and write the panel contents on it. A home proof will not show exactly how the production stock feels or folds, but it can reveal a wrong panel order, an upside-down reverse or an awkward place for a heading. If the order is large or the fold is central to the design, ask what kind of folded proof or stock sample the printer can supply.
- Start with the cover showing. Hold the piece as someone would lift it from a display and check whether they can identify it and find its opening edge.
- Open it in stages. Notice what is visible after the first move. Is the next piece of information where a reader would look for it?
- Turn it over. Check that the back reads upright and that both printed faces put the intended content on the same physical panels.
- Reopen the delivery PDF. Check the page order and dimensions, and remove temporary template instructions if the supplier asks you to. Compare the file with the mock-up you approved.
The related MaryChuks guide to recalculating a book spine after the last edit makes the same broader point about print: once paper, folds or binding affect the result, measurements are part of the content’s delivery. For a leaflet, the most revealing sign-off is to give the folded proof to someone who has not seen the artwork and watch where they go first. That is where the design begins to act like the object you are paying to print.
Sources
- Solopress: Folded leaflet type guide (6 September 2019).
- fPrint: Folded Leaflet Templates (supplier’s specifications).
Discover more from Marychuks.com AI, Psychology, Business & CreativeVerse
Subscribe to get the latest posts sent to your email.